***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

FRONT GRILL

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Sun Nov 08, 2009 3:33 pm

The VW comes out with the centre of the front bumper chromed out, like what I am trying to do.

Image
Last edited by Aspired on Tue Nov 10, 2009 7:14 am, edited 1 time in total.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Nov 08, 2009 4:06 pm

Your attempt to vinyl the front with chrome looks good in the pictures. It certainly looks like you wanted. I have never tried to vinyl but I assume chromed would be a lot less forgiving then flat black. It must have been difficult over the tow insert and the edges?

User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Sun Nov 08, 2009 4:13 pm

Aspired! You have invigorated my quest to get chrome grills! :)
Been looking for soooo long...but not willing to pay over $500 from Mitsu to get them.
Image

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Nov 09, 2009 9:32 pm

i am off to the sign writers tomorrow to pick up a piece of chromed vinyl. They said it is not very flexible and I may have trouble trying to bend it around corners, but my best mates brother use to be a sign writer and he is going to help me apply it. Hopefully we don't screw it up. I hate things when they don't look professional. If it cracks or looks shit on champagne I can always take it off and said I gave it a go. I will post pictures either way.
I am hoping to do it Saturday as I am going on MCA cruise on Sunday.

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Mon Nov 09, 2009 10:29 pm

Good luck, I hope this one works well and you like it
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Tue Nov 10, 2009 1:49 am

I'm half considering lighting up my grill with LED's. Only hitch is, all the auto stores in my area only have blue and well... blue is just too 'common'.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Tue Nov 10, 2009 5:41 am

scraverX wrote:I'm half considering lighting up my grill with LED's. Only hitch is, all the auto stores in my area only have blue and well... blue is just too 'common'.


oznium.com - have a look at the pirhana bars :D
shipping is generally 5 working days from my personal experience
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Tue Nov 10, 2009 6:56 am

Good luck with the chrome.
I think the best way to do it will be a combination of wet and dry with a second pair of hands helping out.

Wet the center section of the bar, where the numberplate goes and leave the sides dry.
Using 2 people hold the vinyl straight over the bar and stick it on at the same time.
The soapy water in the middle of the bar will allow you to move the creases towards the center of the bar where you could cut them out and once you fit your number plate you won't be able to see the cuts in the vinyl.

Since this stuff does not stretch you are going to get creases, you just need to work out a way to move them behind your numberplate.

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Tue Nov 10, 2009 7:40 am

Ask if it's a 'chrome mylar', aspired and I looked at some of that stuff but it fades (aparently very quickly) with UV light (ie. ok for shop signs in shade, but not for cars so much)

Aspired has sourced some actual 'adhesive chrome' from the sounds of his posts, a different material and we're hoping it WON'T fade like the chrome mylar you get from sign shops...

Could always try it! my sign-guy may be wrong ;-) or ur guy may have different stuff...

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Tue Nov 10, 2009 6:10 pm

Well its been very hot with high UV rating all week and the cars been out in full sunlight so the chrome is getting a good workout.
Here are the specs of the chrome vinyl I used:

Image

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Wed Nov 11, 2009 6:22 am

Good find! SOUNDS like that stuff'll do the trick - u got it on ok in the end ay?

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Wed Nov 11, 2009 1:07 pm

JazzyB wrote:Good find! SOUNDS like that stuff'll do the trick - u got it on ok in the end ay?

I do currently have the chrome on, but it should really be done again.
Click here for the chrome front bumper thread

User avatar
Marc-VRX
INACTIVE Member Account
Posts: 26
Joined: Thu Sep 24, 2009 12:57 am
Location: Sydney, Australia

Postby Marc-VRX » Thu Nov 12, 2009 12:44 am

Have most of you guys opted to vinyl the front bumper yourselves or just replace it with a different piece. I'm just curious, cause I ordered the Mitsubishi option to have it vinyled and 'm just wondering if looks as good as the custom ones. (car wont be ready for another week :( so I'm not gonna get a chance to see it before I pick it up)

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Nov 12, 2009 6:47 am

The OEM one looks alright, but the biggest issue with it is that it doesn't quite fit properly.

I don't have my bumper blacked out, but I have read on here that a few people who opted for the factory option ripped it off and redid it themselves.

If it is still a week away, I would see if you can change to a different option and do it yourself.

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Thu Nov 12, 2009 7:21 am

yeah, it's $30 wasted in most ppl's opinion... doesn't quite come to the edges.

It's probably more noticable in person but if you look at this pic (close-up = go to my garage) you can see how it doesn't quite come to the edges...

Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 58 guests