***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Scratched Up Front Spolier

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Zac6221
Lancer Newbie
Lancer Newbie
Posts: 51
Joined: Wed Apr 29, 2009 3:56 pm
Location: Sydney, NSW, Australia

Scratched Up Front Spolier

Postby Zac6221 » Sat Nov 07, 2009 12:48 pm

OMG I know this sounds vain and makes me seem like a clean freak the bottom of my front spoiler is scratched to hell.

I know after 10000km it would start to look crap but when I decided to go underneath the front of my car to take a looks it nearly brought me to tears.

How is your paint underneath there? I know you can't see anything from the front but knowing the bottom looks crap still hurts.

Is it worth repainting? I know it wont rust as its plastic but are there any cons with leaving it like that?

Funny thing is I haven't lowered my car nor gone over any high bumps

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Nov 07, 2009 12:50 pm

You'll get used to it.

Mine is like that, and still at stock height also. I also try to stay well celar of those parking stopper thingos, some of those are quite high.

It is fine to leave it as is, nobody has noticed mine unless I have told them to get on all fours and have a look under it.

Zac6221
Lancer Newbie
Lancer Newbie
Posts: 51
Joined: Wed Apr 29, 2009 3:56 pm
Location: Sydney, NSW, Australia

Postby Zac6221 » Sat Nov 07, 2009 12:56 pm

Bit of a relief there sir-vrx, yeah you can only see it if u go down to have a close look.

If only Mistu can create ultra tough paint for next time I would be happy as larry considering I foolishly opted to go with paint protection which is complete BS

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sat Nov 07, 2009 1:09 pm

I scraped mine badddd last night. Ofey was full beeping me when he saw me do it lol. You learn to live with it and the cost of repainting the part wouldnt be worth it because you never see it.
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sat Nov 07, 2009 1:13 pm

I too have 2 scratches underneath and it pisses me off. I blame the wife. It is so hard to judge the distance from parking bollards. I don't think parking sensors will help either. I think painting the underneath with the stone chip protector and then black will make the scratches less noticeable.

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Sat Nov 07, 2009 1:37 pm

Hey, bad luck.. mine is also scraped, but I have lowered my car by 30mm..so to be expected.

I am also of the same feeling, looks bad..makes me feel bad.

So, to that end, I covered mine with some sacraficial matt black 3M vinyl, cut to shape and looks quite effective...

When that scrapes, you just replace it.

My 2c

User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Postby exaltd » Sun Nov 08, 2009 12:29 am

Gee, you think yours is bad, mine is scratched too.... both sides....

It also has a piece a little broken off (still attached on one side... because it hit a pot hole then speed bump straight away.... the suspension didn't pick it up fast enough (damn ES, too soft...) and now I have to live with that.... Did that at Docklands just outside Costco when going there.... I cried!

My car is stock height, and I considered repainting it, but I just started to live with it, it's a fact of life, for many cars nowadays....

Cheer up, we're all in the same boat! :D

-EXALTD-

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Sun Nov 08, 2009 12:44 am

Lol, at track day I noticed mine had two bits projecting down in front of the front wheels - like little mud flaps but in front - the bottom edge of them is all scraped up. Mine's stock height too but the first time I took it out the drive at my local repco I heard a scrape. It's a BAD driveway so now I just snake down it. Doesn't worry me though, it's just a piece of plastic and that's possibly what it's there for... to warn you by getting scraped :D
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
M@verik
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 385
Joined: Sat Nov 22, 2008 6:08 pm
Location: JHB, South Africa

Postby M@verik » Sun Nov 08, 2009 2:58 am

Jip mine are scratched too. Just leave them.
________________________
Image
Past: Nissan Xtrail 2.5
Current: Mitsubishi Lancer 2.0

Weight loss, tuning

User avatar
jamez707
Lancer MASTER
Lancer MASTER
Posts: 1508
Joined: Mon Oct 20, 2008 5:10 pm
Location: Brisbane, QLD, Australia

Postby jamez707 » Sun Nov 08, 2009 8:59 am

mine are stuffed all scratched up...these things happen
Red Tail Light Brigade Member #3 - ClubCJ Lifetime Member #007
JAMEZ THE TAGMASTER

Image

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Nov 08, 2009 9:45 am

scraverX wrote:Lol, at track day I noticed mine had two bits projecting down in front of the front wheels - like little mud flaps but in front - the bottom edge of them is all scraped up. Mine's stock height too but the first time I took it out the drive at my local repco I heard a scrape. It's a BAD driveway so now I just snake down it. Doesn't worry me though, it's just a piece of plastic and that's possibly what it's there for... to warn you by getting scraped :D


My little black flaps are shaved by at least 15mm :lol: HAHAHA

They scrape coming out of my driveway... I'm at stock height... My driveway is weird and I can't get out of it easier unfortunately.

But it is there to aid in aerodynamics! It was designed to stop air swirling up into the wheel wells, thus reducing drag.

mitsfan
Lancer Newbie
Lancer Newbie
Posts: 46
Joined: Sun May 03, 2009 9:13 pm
Location: Melbourne, VIC, Australia

Postby mitsfan » Sun Nov 08, 2009 9:46 am

Yes, my front air dams are scratched underneath near the middle on both sides, despite my best attempts to avoid doing it. My CJ is also stock height still.

There is not much point repainting, as it is nearly impossible to avoid scratching it again in the future.

One day I scratched my front air dam just slowing down on a bitumen road BEFORE turning into a driveway and while still driving straight. The road had enough curvature that then driving near the left side to let traffic pass and slowing down (which lowered the front of the car further), it actually scapped on the road before turning in.

User avatar
86MIM
Lancer Evolution
Lancer Evolution
Posts: 933
Joined: Mon Nov 23, 2009 3:28 pm
Location: Brisbane, Australia

Postby 86MIM » Tue Nov 24, 2009 9:44 am

*phew* here i was thinking that i was a complete noob with driveway judgement... the reason i will not be getting front OR rear kits, cannot get in or out of 90% of driveways in brisbane grrr...
kii

tykkään kiiltävä, nopeasti ja se on saanut olla ähkyä.
_________________
ClubCJ Lifetime Member #86

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Tue Nov 24, 2009 11:35 am

Not trying to sound mean... and I know you all love your cars to death but... its no big deal, no one is going to see it and I doubt people are going to go around looking under people's fronts to check and judge your car like that lol.. Dont bother repainting it, the money can be well spent elsewhere to make up for it =). My exhaust scrapes everytime I go up my driveway unless I spend a minute going up "correctly". You learn to get used to it.

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Tue Nov 24, 2009 11:40 am

I kinda suspect this is one possible reason why I see some cars in Canberra (fords and holdens) that are sitting lower in back.

"Duh.. I scraped my spoiler. No probs, raise the front a bit, yeah"

lol
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125

Car & Home audio nut.

Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS

Home Audio: Denon, Epos, Pro`ject, AKG


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 55 guests