***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

One of the cheapest body kits in the market

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Oct 27, 2009 5:57 pm

Blakey: Don't jinx it! I tell you the funniest thing would be yours cracking before Armando!

Look I'm sure Armando also realises that for A$120 for a part, if it cracks it's no biggie. You just buy another! He can do it 15 times over before reaching your cost!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Tue Oct 27, 2009 7:24 pm

Hi Armando, read your Private Messages (PM) regarding ARS Body Kits

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Tue Oct 27, 2009 7:47 pm

I actually got my fender side vents and my evo front nose grille from ARS. had it a while ago now..
found the company thru 9glancers.com (CJ com)
lot of 9glancers use the HL Lip diffuser..

They are indeed cheap, really cheap.
my sidevents however required prepping so i had to prep it with dremil to fit it nicely.

Someone mentioned that they have a warehouse in perth. but not sure if its true or prolly misunderstood.
Image

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Tue Oct 27, 2009 7:55 pm

they do i think search for ars bodykit australia there is a site
Uchiha Itachi
Image

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Tue Oct 27, 2009 8:02 pm

yep, just checked.
thats right it was daveee who told me bout it. when i bought the vlip off him.

yeh, last time i checked their last creation was evox replica bonnet. but fibreglss.. meh~
Image

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Tue Oct 27, 2009 8:05 pm

yer i know that ofey. but if its as it says it is a its plastic then it shouldn't crack unless its badly weathered.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

matchstick
Lancer Learner
Lancer Learner
Posts: 17
Joined: Mon Oct 05, 2009 8:10 pm
Location: Colton, Ca. USA

Postby matchstick » Wed Oct 28, 2009 6:11 am

How is this new?

ARS has been shipping these products to us in the US for over a year now. For around $120USD (HL front and rear lips are $71USD each before shipping).

And he has proved very reliable to our US community and the 9glancers forum.

The source of these molds was Sigma Motorsports, BTW, and do run in the hundreds of dollars.

Blakey, there is a splint piece that connects the 2 halves which stops any cracking of the joint.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Oct 28, 2009 6:38 am

In view of the response on this forum and Matchstick's response as well about ARS, I will be officially inviting them on board as a sponsor. Give me some time to work on it.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Miggy
INACTIVE Member Account
Posts: 31
Joined: Mon Sep 28, 2009 10:18 am
Location: Ramsgate, Sydney

Postby Miggy » Wed Oct 28, 2009 7:17 am

Armando Can you please tell us what the rear diffuser fitment is like when holding it up against the rear bumper?
Is it a good fit???
And what is the finish like? will it require some cleaning up first??

User avatar
ARMANDO
INACTIVE Member Account
Posts: 56
Joined: Tue Aug 25, 2009 1:46 pm
Location: Balmain, SYDNEY

Postby ARMANDO » Wed Oct 28, 2009 8:08 am

the finish is really good surprisingly good. the piece comes in two pieces, and in the middle have a plastic join. fits quite good. basically the party sits in the rear bumper . under the two red reflectors. the part have the same shape so it just sit on top of that protuberance. ( i don't know how to call that, sorry i hope that make sense)

and in the sides just grap the rear bumper from the corners.

fits really well and nice but probably I need to double taped and bolt it underneath for a perfect fit .
is going to be a while before i fit it in, so if anybody is in Sydney and is interested to see the pieces. just let me know and you can past to my house in balmain

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Oct 28, 2009 8:23 am

Armando, would you please take some pictures to show?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
ARMANDO
INACTIVE Member Account
Posts: 56
Joined: Tue Aug 25, 2009 1:46 pm
Location: Balmain, SYDNEY

Postby ARMANDO » Wed Oct 28, 2009 9:35 am

sure i will do it tonight with more detail in the joins and edges. so I'll post it tomorrow.

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Wed Oct 28, 2009 1:26 pm

Something similar:

Image
Image

Image
Image

*photos are from our freinds from 9glancers

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Wed Oct 28, 2009 1:39 pm

tatsujo's car ! lol
Lancer Evolution 10MR

User avatar
krz
Alumni
Alumni
Posts: 445
Joined: Mon Jan 12, 2009 10:13 pm
Location: Sydney, NSW, Australia

Postby krz » Wed Oct 28, 2009 1:48 pm

yeh! the first car that inspired me~
was gonna go for this rear diff, but went with talon instead.
Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 61 guests