***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ralliart Bodykit and Int/Ext-ernal Conversion Guide

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
ash06
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 396
Joined: Sun Dec 28, 2008 3:47 pm
Location: Sydney, NSW, Australia

Postby ash06 » Wed Sep 19, 2012 8:31 pm

Hi,

I scored a RA front & hood for cheap a few weeks ago & it is getting installed friday,

I have everything on the front bar except the chrome trim,
I would like to try my best *not* to spend $250 on a chrome trip..

So do any RA owners know how wide the ring is?

I would like to see if I can get away with retro-fitting the 'chrome arch moulding' instead.

I'm painting the surround black anyway so it doesn't need to be 100% accurate,

I would just be interested in knowing the width or the factory trim so get the same look

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Mon Dec 31, 2012 10:09 am

yeah, they will erin, u have to drill a couple of holes (already half drilled).
main downside is OEM EVOx wing will set u back anything from $1700 up approx.
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Thu Mar 07, 2013 10:47 pm

mephisto69 wrote:Ive been trying to find the thread on fitting an Evo X front tower strut into an Activ but I must not be searching properly. Anyway this thread looks like the right one to ask the question. So Ive managed to get hold of a front tower strut bar from a written off Evo. Will it fit onto my standard Active front towers?


Hey man it will fit 100% Ive got one in mine.

datta99_s
Lancer Learner
Lancer Learner
Posts: 7
Joined: Fri Dec 26, 2014 10:14 am
Location: Melbourne, Australia

Postby datta99_s » Fri Dec 26, 2014 12:52 pm

I need the chrome lining for the front bumper of my Mitsubishi Lancer Sports Sedan ES CJ 2013 MY14 new model - Only the chrome lining is cracked and broken. Can somebody let me know where I can buy this?

Thanks

User avatar
evil.ralliart
Lancer Evolution
Lancer Evolution
Posts: 840
Joined: Tue Mar 29, 2011 7:18 pm
Location: Queensland

Postby evil.ralliart » Sat Dec 27, 2014 3:39 pm

datta99_s wrote:I need the chrome lining for the front bumper of my Mitsubishi Lancer Sports Sedan ES CJ 2013 MY14 new model - Only the chrome lining is cracked and broken. Can somebody let me know where I can buy this? Thanks

Genuine only...so will cost a fortune and a pain to replace...evidentally you have to take the whole bumper off to replace it properly. Non genuine (ie Chrome body molding) can look a bit dodgy.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Dec 27, 2014 6:13 pm

I must say I'm a little sad now, I missed out on a VRX with a RA bonnet and exhaust and rear bumper. Looking at the prices here it would have cost the owner a small fortune to have them put on his VRX.
Image
My rides CJ VRX - CC coupe

Cyanide_Power
Lancer Learner
Lancer Learner
Posts: 3
Joined: Sun Dec 14, 2014 8:41 am
Location: Slovakia

Postby Cyanide_Power » Wed Feb 11, 2015 10:14 pm

Sorry for reviving this but I cant find any relevant info. If ill pull a steering out of a RA with cruise and audio controls - will it fit my lancer plug/play ? Since I already have my stock wheel with all those controls. I just dont want that big steering wheel .... :)

himynameisdaniel
Lancer Evolution
Lancer Evolution
Posts: 824
Joined: Mon Feb 14, 2011 3:58 pm
Location: Adelaide

Postby himynameisdaniel » Thu Feb 12, 2015 7:35 am

Yes as far as I am aware everything is plug and play.

Paddle shifters are only for TC-SST and CVT.

User avatar
itsagrantos
Lancer Newbie
Lancer Newbie
Posts: 79
Joined: Fri Nov 22, 2013 10:59 am
Location: Melbourne

Postby itsagrantos » Wed Aug 26, 2015 1:40 pm

I really want to do this for my VRX Sportback, I have the dodgy DIY chrome moulding, I love the look, but want it for real.

Is it possible to get a front bar of the newer model (non RA) lancers that have the chrome surround?

User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Wed Aug 26, 2015 3:22 pm

itsagrantos wrote:I really want to do this for my VRX Sportback, I have the dodgy DIY chrome moulding, I love the look, but want it for real. Is it possible to get a front bar of the newer model (non RA) lancers that have the chrome surround?


Yes.

You may need the VIN from a car that comes with it standard to be able to order one though, I know that used to be the case. Have a look on Carsales.com.au and you should be able to find a VIN.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Wed Aug 26, 2015 5:34 pm

If anyone's interested I'll be replacing my whole front bumper soon and my stock one has the chrome ring although it's plastic dipped black at the moment.


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 87 guests