***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

2013 Ralliart Convert to Evo x Body Only

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
gondenk
Lancer Newbie
Lancer Newbie
Posts: 79
Joined: Thu Nov 28, 2013 1:58 pm
Location: sydney australia

Postby gondenk » Tue Mar 18, 2014 8:33 pm

https://www.facebook.com/rainbow.pen.3/ ... 060&type=3

Check this link. They sell the body kit for lancer n/a and ralliart

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Tue Mar 18, 2014 8:44 pm

lantourismo wrote:He probably could have found an evo 9 for the money of the RA


Personally I'd stick with the RA and use the money to bring the performance closer to EvoX specs.

Then stick loads of bodykit parts on it!

:-)
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Tue Mar 18, 2014 8:46 pm

Zaphod wrote:[quote:5a871b45c9=lantourismo]He probably could have found an evo 9 for the money of the RA[/quote:5a871b45c9] Personally Id stick with the RA and use the money to bring the performance closer to EvoX specs. Then stick loads of bodykit parts on it! :-)


Yeah or that. But i would not buy a RA and try and change it to an EVO using genuine parts the cost and work involved, not to mention it might not fit at all..

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Tue Mar 18, 2014 8:46 pm

Zaphod wrote:[quote:5a871b45c9=lantourismo]He probably could have found an evo 9 for the money of the RA[/quote:5a871b45c9] Personally Id stick with the RA and use the money to bring the performance closer to EvoX specs. Then stick loads of bodykit parts on it! :-)


Yeah or that. But i would not buy a RA and try and change it to an EVO using genuine parts the cost and work involved, not to mention it might not fit at all..

Hbomb931
Lancer Newbie
Lancer Newbie
Posts: 94
Joined: Tue Feb 11, 2014 9:45 pm
Location: Perth, Australia

Postby Hbomb931 » Tue Mar 18, 2014 8:59 pm

I must confess, I love my RA but I am on a "quest" to making my RA just as good, if not better (performance wise) then the EVO X but still keeping that "stock" or "sleeper" look. Less attention from the police and anyone that gets close will assume its just your everyday RA ........... or is it....

With that In mind, I would agree with some of the guys on here and suggest leaving the outside looking stock and focus your attention (money) on the internals ;)

However, everyone has their own ideas but your in the right place to seek advice!!
Ben H

perth, WA

2014 Mitsubishi Ralliart

Mods:-

3" Cat back exhaust system with UR pipes
Turbo smart BOV (recirculation)
HKS spark plugs
K&N Air Filter
Tune (198kw and 415nm at the hubs)

Image

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Tue Mar 18, 2014 9:15 pm

Hbomb931 wrote:...suggest leaving the outside looking stock and focus your attention (money) on the internals ;)



Whereas I've been doing the exact opposite so far...! :-)
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Wed Mar 19, 2014 7:21 am

id rarther an ra over a evo 9
looks wise i think the cj is much better.

in all honestly an exhaust boost pill and a good tune will get you to evo x specs and improve fuel economy
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 43 guests