Hey guys!
I was just wondering what your opinions are on boot lip spoilers vs evo spoilers. I'm thinking about getting one and currently looking at them like the one below.
I was thinking maybe get it wrapped in Carbon Fibre Patterned vinyl. Seeing as it is a bit cheaper. But i love the look of the evo spoilers but think it would be too 'try hard' seeing as I'm driving a normal LX(basically es, no performance lancer) and it is also a bit expensive.
Also does anyone know if it's worth to go buy those $100 dollar boot lip spoilers as opposed to the cheaper $50 ones? are they pretty much all the same or does quality/fitment play a big part with the cost difference?
http://www.ebay.com.au/itm/MITSUBISHI-LANCER-07-12-Boot-lip-spoiler-Aussie-Seller-/171250743828
Thanks in advance guys!
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Boot lip spoilers vs Evo spoilers
Moderators: Moderators, Senior Moderators
- MyEducation
- Lancer Newbie
- Posts: 36
- Joined: Sun Feb 02, 2014 1:07 pm
- Location: Australia
- MyEducation
- Lancer Newbie
- Posts: 36
- Joined: Sun Feb 02, 2014 1:07 pm
- Location: Australia
I really like this, dunno if it'll turn up nice on white tho haha.
(Damir Kurspahic Car)
(Damir Kurspahic Car)
Last edited by MyEducation on Sun Mar 02, 2014 10:25 pm, edited 1 time in total.
- Metalstrix
- Post Monster
- Posts: 2739
- Joined: Thu Dec 13, 2012 4:16 pm
- Location: Sydney Australia
- belle_tb_ES
- Post Monster
- Posts: 2614
- Joined: Tue May 08, 2012 11:39 am
- Location: Hills District, NSW
Depends on the look you are going for.
Factor in a different rear bar/diffuser if you plan to go down that route too
Some people like the subtlety of a little to no spoiler.
Have a good browse through all of the different types you can get...from evo 8/9 replicas such as mine through to more of a duck bill look
Factor in a different rear bar/diffuser if you plan to go down that route too
Some people like the subtlety of a little to no spoiler.
Have a good browse through all of the different types you can get...from evo 8/9 replicas such as mine through to more of a duck bill look
PRESENT: 2015 Audi S3
PAST:2009 Lancer ES called Lancee...
Garage: http://clubcj.net/garage.php?mode=view_vehicle&CID=947
I
PAST:2009 Lancer ES called Lancee...
Garage: http://clubcj.net/garage.php?mode=view_vehicle&CID=947
I
- MyEducation
- Lancer Newbie
- Posts: 36
- Joined: Sun Feb 02, 2014 1:07 pm
- Location: Australia
Metalstrix wrote:You can do better than a duck lip mate lol. I have a VRX, no turbo, Im getting an Evo spoiler. Many people have done it. Get what ticks in your head that makes you say I want that one
lol damn chuck up some pics when you get it done!
every time I go "I want that one" my wallet's like #nope. Life of a uni student ahaha. Will have to think about saving up for one of them. Aren't they like about $300 + $200+(for paint)?
hahaha love how I'm an example <3
ill inbox you a pic of my car with a spoiler as i put one on the top of my boot for shits n gigs
looked so bad
i mean i guess it is what kind of look you are going for
low low cars look amazing on lips
i personally dislike the duckbill a lot
spoiler is good but yeah
i had this debate awhile ago as well on the forum
my carbon fibre one set me back 150 delivered and its a nicer fit then the oem one as it moulds around the rear brake light
some go spoiler and lip but i don't like that look
again personal preference
ill inbox you a pic of my car with a spoiler as i put one on the top of my boot for shits n gigs
looked so bad
i mean i guess it is what kind of look you are going for
low low cars look amazing on lips
i personally dislike the duckbill a lot
spoiler is good but yeah
i had this debate awhile ago as well on the forum
my carbon fibre one set me back 150 delivered and its a nicer fit then the oem one as it moulds around the rear brake light
some go spoiler and lip but i don't like that look
again personal preference
My Build Thread : http://clubcj.net/viewtopic.php?t=14731
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
- Metalstrix
- Post Monster
- Posts: 2739
- Joined: Thu Dec 13, 2012 4:16 pm
- Location: Sydney Australia
MyEducation wrote:[quote:b2f951d4e1=Metalstrix]You can do better than a duck lip mate lol. I have a VRX, no turbo, Im getting an Evo spoiler. Many people have done it. Get what ticks in your head that makes you say I want that one[/quote:b2f951d4e1] lol damn chuck up some pics when you get it done! every time I go I want that one my wallets like #nope. Life of a uni student ahaha. Will have to think about saving up for one of them. Arent they like about $300 + $200+(for paint)?
Lol I"m a uni student too. Just spent $469.99 on Projector headlights.
With the spoilers, it depends on quality and what model you get. Painting might be about less than $200.
They will learn... I will always be a step ahead
No longer an active member.
No longer an active member.
evo x or duckbill its a hard choice.
if u go evo you need to drill and cant go back (unless u plug the holes) if u go do luck and dont like it u can rip it off and go evo x
if u go evo you need to drill and cant go back (unless u plug the holes) if u go do luck and dont like it u can rip it off and go evo x
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
like if you tint the brake light, black rims and carbon fibre lip it will match and look good, worst case is that i wrap it in avery gloss white for ya
My Build Thread : http://clubcj.net/viewtopic.php?t=14731
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-
- MyEducation
- Lancer Newbie
- Posts: 36
- Joined: Sun Feb 02, 2014 1:07 pm
- Location: Australia
bye2u wrote:Ive got photos of that CF lip test fitted on my white RA.. \
Ah looks pretty sweet man
Damir wrote:like if you tint the brake light, black rims and carbon fibre lip it will match and look good, worst case is that i wrap it in avery gloss white for ya
Ah yeah probably should try get a nice set of black wheels first but don't really know where to look haha. Can already picture that setup in my mind
- jordan.fuchs
- Lancer Ralliart
- Posts: 705
- Joined: Mon Feb 11, 2013 1:00 pm
Who is online
Users browsing this forum: No registered users and 85 guests