***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Fast curing Sikaflex?

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Wed Apr 24, 2013 11:17 am

Be careful which silicon you use. RTV silicon has acetic acid in it (smells like vinegar) which promotes rust very quickly.Best to look forsomething neutral.Can you hold the bits on with masking tape or similar while your adhesive goes off ?.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"
User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Wed Apr 24, 2013 5:20 pm

liquid nails press and go
http://www.selleys.com.au/adhesives/con ... press-n-go
User avatar
Miss Aussie
Lancer VR/GT
Lancer VR/GT
Posts: 284
Joined: Mon Jul 25, 2011 8:01 pm
Location: Adelaide

Postby Miss Aussie » Wed Apr 24, 2013 6:49 pm

Loctite 770, 403, 408 etc
User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Wed Apr 24, 2013 7:46 pm

770 is just way overkill (great shit) but it will either melt the plastic or turn it brittle.

Most loctite stuff rely on a chemical reaction to cure and this produces alot of heat
User avatar
Miss Aussie
Lancer VR/GT
Lancer VR/GT
Posts: 284
Joined: Mon Jul 25, 2011 8:01 pm
Location: Adelaide

Postby Miss Aussie » Wed Apr 24, 2013 9:07 pm

I've never melted anything lol
User avatar
evolx08
Lancer Newbie
Lancer Newbie
Posts: 40
Joined: Sun May 29, 2011 3:13 pm
Location: Victoria

Postby evolx08 » Wed Apr 24, 2013 9:11 pm

3M tape AND sikaflex 227 ftw
LaNcE
Lancer VR/GT
Lancer VR/GT
Posts: 219
Joined: Mon Jan 10, 2011 1:33 pm
Location: melbourne, victoria

Postby LaNcE » Wed Apr 24, 2013 11:11 pm

lancerdarryl wrote:Be careful which silicon you use. RTV silicon has acetic acid in it (smells like vinegar) which promotes rust very quickly.Best to look forsomething neutral.Can you hold the bits on with masking tape or similar while your adhesive goes off ?.


shoot. which RTV are you talking about? ive used RTV to stick my spoiler on my challenger!
User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Thu Apr 25, 2013 12:26 am

Dow Corning "Silastic" Brand is the most common one . If you still have the tube or cartridge that you used have a sniff if it does smell like vinegar I would be taking it off and using something neutral like sikaflex.
LaNcE wrote:[quote:2d25eba3e4=lancerdarryl]Be careful which silicon you use. RTV silicon has acetic acid in it (smells like vinegar) which promotes rust very quickly.Best to look forsomething neutral.Can you hold the bits on with masking tape or similar while your adhesive goes off ?.[/quote:2d25eba3e4] shoot. which RTV are you talking about? ive used RTV to stick my spoiler on my challenger!
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 23 guests