***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

If only our lights were like this

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

If only our lights were like this

Postby Alixxandar » Fri Aug 03, 2012 10:38 pm

Image

Just found this picture of the sportback concept on this page:
http://www.zcars.com.au/mitsubishi-lancer-sportback-ralliart/

If only our lights could look like these, even if an aftermarket set got released for the sportback, I'd be over the moon.

Although, I can't help but think the FT-86's lights look surprisingly like these ones on the concept?

User avatar
Ballababy
Lancer Learner
Lancer Learner
Posts: 14
Joined: Sat Nov 19, 2011 3:30 pm
Location: Sydney, Australia

Postby Ballababy » Fri Aug 03, 2012 11:00 pm

Those lights are pretty nice. But in my opinion the front and rear lights on the CJ, especially the sedan, look really good. Lancers look really mean with those round eyes !

and I don't think the 86 headlights look that great.

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Fri Aug 03, 2012 11:32 pm

I love the front headlights, don't get me wrong. And I don't particularly dislike the rear ones either. But the Sedan has aftermarket options available, where-as there are none for the sportback :cry:
Image

User avatar
debonaire
Lancer Ralliart
Lancer Ralliart
Posts: 504
Joined: Tue Jun 07, 2011 9:55 am
Location: Brisbane

Postby debonaire » Sat Aug 04, 2012 5:05 pm

Those rear lights look bloody awful! Just look like some tacky plastic thing every teenager would put on there car if given the chance, like what happened 10 years ago with the Altezza style lights.

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Sat Aug 04, 2012 7:05 pm

Granted, they might go down the altezza route, but we definitely need some options other than tint film and VHT nite shades for our lights
Image

User avatar
SideWayz
Lancer Newbie
Lancer Newbie
Posts: 46
Joined: Tue Apr 26, 2011 1:50 am
Location: HUNTINGDALE

Postby SideWayz » Sun Aug 05, 2012 3:54 am

looks like lexus lights SEXY!!
EVO X <3

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Sun Aug 05, 2012 9:51 am

@ Alex,

Here is an article I read a while ago from a guy at 9G Lancers.
He was also frustrated because no one had bothered to make a LED Tail-light to suit the Sports Back Lancer.

So he decided to make the Factory Tail-lights look a bit better in his opinion.

Here is a link to my previous thread in Dec 2011
SportsBack Tail Lights Black-Customised


Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L
Merlin Inspired Variable Engine Control
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
billy boy
Lancer Evolution
Lancer Evolution
Posts: 782
Joined: Sun Nov 22, 2009 5:10 pm
Location: Adelaide

Postby billy boy » Sun Aug 05, 2012 11:53 am

nice link - can't believe i missed that before :) might have to try that out!
we are fascinated by that which can destroy us...

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Sun Aug 05, 2012 12:21 pm

As I mentioned in my OP, I'd like something other than nite shades. I like the tinted look, but in my opinion the lights are too much of a 'block colour'. Plus, LED's look a lot better.

Might give the nite shades a try anyway though, it'd be better than nothing. That topic on 9g has a couple of good designs. I didn't realise nite shades could be so versatile
Image

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Sun Aug 05, 2012 12:43 pm

If I were doing a similar mod to my Tail-lights, I would buy some Gloss Carbon Vinyl and cut it in the form of a template.

You would obviously need to make several Trial Templates from brown paper or light cardboard or general stick-on vinyl available from hardware stores etc.
Similar to these which suit a KIA KOUP

Image

Link: Kia 08-11Forte Cerato&KOUP Carbon Eyeline HeadLamp Trim


Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L
Merlin Inspired Variable Engine Control
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Sun Aug 05, 2012 1:57 pm

That'd work pretty well. Even with 3M vinyl, and just cut a template from that
Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 61 guests