***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Front Drivers Seat Broken!

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Front Drivers Seat Broken!

Postby R4LLI4RT » Fri Feb 07, 2014 8:04 am

Ok so about a year ago my drivers seat foam began to break (near the right hand side closest to the drivers side door) down to the point where you could feel the metal in it.
took it to my local mitsu dealer and they replaced it. now a a year later and the same thing is happeneing again. does any1 else have this problem or heard of this before. because this is now the second time i have taken it back mitsu dealer needs a rep to come down and inspect it, im not happy because honstly its the small things like this that really pee me off.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Fri Feb 07, 2014 9:17 am

yeah but its not like im 130kg or anything.
i think it might be the actual seat or maybe the steel inside might be too sharp.
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
citris.87
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 488
Joined: Mon May 06, 2013 2:09 pm
Location: Townsville

Postby citris.87 » Fri Feb 07, 2014 1:05 pm

Interesting, leather or material seats? Do you have a picture of where it is? Might have to check mine haha, I have noticed that mine has an issue at the moment where I set it up to a certain straightness, and after 1-2 days it seems to sing back about 1-2 inches, doesn't seem like a lot but makes me feel like I'm driving gangsta... haha

Good to hear they replaced it, but it is something I have not heard before.

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Mon Feb 10, 2014 2:58 pm

kirtis, no they are just the fabric ra seats. ill try upload a pic sometime today or tomorrow.
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
billy boy
Lancer Evolution
Lancer Evolution
Posts: 782
Joined: Sun Nov 22, 2009 5:10 pm
Location: Adelaide

Postby billy boy » Mon Feb 10, 2014 11:09 pm

maybe it's a sign to get recaros? ;)
we are fascinated by that which can destroy us...

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Feb 11, 2014 7:56 am

hahaha! bill if only i had the cash, i would been onto them in a heart beat
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Tue Feb 11, 2014 8:52 am

That's interesting.

My drivers seat started to squeak about 3 months after putting lowering springs in my car. But i'm 110kg, so I put it down to added stress on the seat.
I think mine is down to the springs. Would be interesting to find out what has broken in your seat.

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Feb 11, 2014 10:12 am

mine is the back rest, down the bottom where it flares out near the hips.
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Mon Feb 17, 2014 2:47 pm

ok so update is they are going to fix it again, but this time they are going to use a thicker and dense foam to stop this from happening.
they said they are going to go to a custom upholsterer to get it fixed.
ive never heard of a company using an external company to fix something under warranty.
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
Miss Wendy
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Sun Aug 18, 2013 4:36 pm
Location: Newcastle

Postby Miss Wendy » Mon Feb 17, 2014 4:05 pm

Repairer replaced the foam in my drivers seat too under warranty. Metal stuck through the bottom RHS back of drivers seat near lumbar controls.

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Mon Feb 17, 2014 4:32 pm

Miss Wendy wrote:Repairer replaced the foam in my drivers seat too under warranty. Metal stuck through the bottom RHS back of drivers seat near lumbar controls.
you poor thing u have had no luck at all
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Sun Feb 23, 2014 11:51 am

Here is a pic. Taking it on Monday to be repaired but honestly stuff like that shouldn't happen. Image
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Sun Feb 23, 2014 11:51 am

Here is a pic. Taking it on Monday to be repaired but honestly stuff like that shouldn't happen. Image
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
Miss Wendy
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Sun Aug 18, 2013 4:36 pm
Location: Newcastle

Postby Miss Wendy » Sun Feb 23, 2014 12:21 pm

That's exactly the same spot that mine went. I have driven another Lancer (2009 model) since mine was repaired (2012 model) and it just starting to break through the material as well. If you rub your hand firmly over that spot you can feel the metal sticking out of the material. :(


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 11 guests