***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Gauges/Pillar Pods

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Tue May 19, 2009 12:54 pm

That looks alright on the pillar, I have a voltage guage which is currently in my magna which I may put into my new Lancer, but probably not on the pillar, most likely somewhere that isn't defectable :(

Having two cars both with yellow stickers would suck!
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

brodon
Lancer Newbie
Lancer Newbie
Posts: 40
Joined: Mon Jun 07, 2010 9:13 pm
Location: Sydney

Postby brodon » Mon Jun 07, 2010 11:00 pm

I have been talking to AMI Customs who said that they would make a custom drivers side dual gauge pillar to replace original pillar for 350.00, i think it would just look nicer if the gauges were molded into the pillar instead of being stuck on.

User avatar
terbo88
Lancer Newbie
Lancer Newbie
Posts: 53
Joined: Tue May 11, 2010 1:53 pm
Location: Sydney, Australia

Postby terbo88 » Tue Jun 08, 2010 11:25 am

brodon wrote:I have been talking to AMI Customs who said that they would make a custom drivers side dual gauge pillar to replace original pillar for 350.00, i think it would just look nicer if the gauges were molded into the pillar instead of being stuck on.


Really?? I send a email 2 days ago and have yet to receive a reply.

Also saw on some evo-x american forum where AMI have sold alot of there pillars, that they were not doing international shipping. Only US and Canada.

If they are that would be awesome. Cause i was looking at the ATI centre console triple pod. But apperently it doesnt sit very well.

brodon
Lancer Newbie
Lancer Newbie
Posts: 40
Joined: Mon Jun 07, 2010 9:13 pm
Location: Sydney

Postby brodon » Tue Jun 08, 2010 5:27 pm

They replied to within a day and said that they would be happy to make one and ship it internationally however it woulod cost because of it. hence the price being 350.00 but i have the email from AMI customs and i am about to order my drivers side pillar soon. hopefully in next week, AMI customs have told me that it would be about a 6 week wait...

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Tue Jun 08, 2010 9:07 pm

have you thought about having one gauge that has many modules and electronic displays?

I have one that you can add up to 45 gauge displays to..

Mine is a CF gauge holder and it can show up to 4 readouts at once...

Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Jun 08, 2010 9:38 pm

Tryg: I'm still wanting the pod and that gauge at the pricing you got them for... . Unfortunately... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Hecky
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 474
Joined: Sun Dec 06, 2009 4:22 am
Location: Sydney, Australia

Postby Hecky » Tue Jun 08, 2010 9:48 pm

....wanted a pod and those gauges too...
HKS/AMS/GFB/MRT/K&N/DBA
Whiteline/Ultra-Racing/Rexpeed/Autometer/Yokohama Racing/Cusco
...and some other stuff which the fun police don't approve of... :)

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Tue Jun 08, 2010 10:06 pm

Ofey, sorry mate.. I sold them all (quite quickly round here) but to get that price I would have to engage the guy in 10+ again.. its a big outlay.

Well over $4k

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Tue Jun 08, 2010 10:11 pm

thats for the gauges and pods

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Jun 08, 2010 10:28 pm

I'll put it up for next month's group buy. Let's see if it'll get any legs to run... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Tue Jun 08, 2010 10:32 pm

how much will it be if we get them in 10-15s ? I'd be interested if the price is right and a group buy happens
Lancer Evolution 10MR

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Sun Jun 27, 2010 12:23 am

I saw the Blitz gauge cluster which replaces passenger panel in the dash... seems quite popular in Singapore.

Image Image

Singaporean installation photos taken from: http://www.sgevoclub.com/post118927.html#p118927

Product URL: http://www.blitz.co.jp/products/meter/rcmp/rcmp.htm
Image

"A man who stands for nothing, falls for anything."

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Sun Jun 27, 2010 2:08 am

yeah , i've been looking at those gauges and talked to speedie about it cause he has it

he says "For a quick glance the cluster is good but if you need a gauge to monitor its unsafe."

if we get a group buy on it , we can get them from rhdjapan cause they offer pretty decent price for group buys
Lancer Evolution 10MR

User avatar
jaykan2k
Lancer ES/EX
Lancer ES/EX
Posts: 104
Joined: Wed Aug 25, 2010 1:51 pm
Location: Sydney, Australia

Postby jaykan2k » Fri Sep 10, 2010 4:00 pm

Anyone have their gauges mounted in front of the gear lever? Was thinking about having the storage compartments removed and having a pod for the boost gauge fibreglassed to blend in with the form of the dash. A bit low, but at least its on there safely.


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 53 guests