***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Hard Plastic Boot Liner

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Itachi
Lancer Evolution
Lancer Evolution
Posts: 776
Joined: Sun Aug 22, 2010 2:49 am
Location: Perth, Australia

Hard Plastic Boot Liner

Postby Itachi » Thu Aug 26, 2010 11:38 pm

Hi all,

I'm chasing a hard plastic boot liner for my VRX sedan. I asked the dealer but as it comes with the Rockford sub they said it wouldn't fit.

Does anyone know if there is a version of this that will fit a sedan with the sub? If not, are they any good alternatives?

Image
Like my car? Follow my fitness blog!

http://www.littleguylifting.com/

User avatar
Clone
Lancer Newbie
Lancer Newbie
Posts: 80
Joined: Thu Jun 24, 2010 11:59 pm
Location: Brisbane, Australia

Postby Clone » Thu Aug 26, 2010 11:48 pm

That is such b_ll sh_t. Don't worry it will fit perfectly.

For us who have a VR-X sedan with the Rockford Sub, all you needed to do is to cut the boot liner along the line and it will fit perfectly. You will know what I mean when you see the real thing.

Just make sure you have a sharp sissors and a cutter.
Last edited by Clone on Thu Aug 26, 2010 11:59 pm, edited 1 time in total.

feral
Lancer ES/EX
Lancer ES/EX
Posts: 183
Joined: Sun Mar 21, 2010 9:29 pm
Location: Gosford N.S.W. Australia

Postby feral » Thu Aug 26, 2010 11:49 pm

The factory one ive got has lines in the plastic that can be trimmed to fit around the sub, It was in me es now in a ralliart with sub.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Aug 26, 2010 11:51 pm

Yes your dealer is such a dipstick. The boot liner is the same for both Rockford equipped and others. You merely cut off the section where the sub is. There is even a line there that you can cut along... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Fri Aug 27, 2010 12:00 am

Huh? I got the liner and it's customer moulded to fit around the rockford sub. It's has a one inch lip all around... (edit:) from memory the bit around the sub is only raise by half an inch.
Ill try and take a pic if you want....
Last edited by The X on Fri Aug 27, 2010 12:21 am, edited 1 time in total.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
milobob
Lancer Legend
Lancer Legend
Posts: 1130
Joined: Mon Aug 31, 2009 6:16 pm
Location: Melbourne

Postby milobob » Fri Aug 27, 2010 12:03 am

Yea, I'm not sure if you can grab them on ebay but there should be ones for the sub and without the sub (just like the outlander).
2010 RenaultSport Megane RS250 Cup Trophee (Xenons+Leather+Front Parkers)

User avatar
Itachi
Lancer Evolution
Lancer Evolution
Posts: 776
Joined: Sun Aug 22, 2010 2:49 am
Location: Perth, Australia

Postby Itachi » Fri Aug 27, 2010 12:05 am

Quickly losing confidence in the dealer...

Thanks for the quick responses guys.

I was hoping to get one pre moulded without having to cut it.

Huh? I got the liner and it's customer moulded to fit around the rockford sub. It's has a one inch lip all around.
Ill try and take a pic if you want....


Yes please!
Like my car? Follow my fitness blog!


http://www.littleguylifting.com/

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Aug 27, 2010 12:10 am

VRX_Pete wrote:Huh? I got the liner and it's customer moulded to fit around the rockford sub. It's has a one inch lip all around.
Ill try and take a pic if you want....


Pete they cut it... .
Same with mine. It looks perfectly moulded but it's cut... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

feral
Lancer ES/EX
Lancer ES/EX
Posts: 183
Joined: Sun Mar 21, 2010 9:29 pm
Location: Gosford N.S.W. Australia

Postby feral » Fri Aug 27, 2010 12:33 am

Yeah it still has a raised lip around the sub about 1 inch high compared with about 3 inches high the rest of the way around

User avatar
jaysewah
Lancer ES/EX
Lancer ES/EX
Posts: 108
Joined: Tue Mar 09, 2010 9:20 pm
Location: Melbourne, SthEast

Postby jaysewah » Fri Aug 27, 2010 8:15 am

Sorry for the slightly off topic question, but is there one of these available for the sportback as well? Cheers

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Fri Aug 27, 2010 8:48 am

Itachi wrote:Quickly losing confidence in the dealer...

Thanks for the quick responses guys.

I was hoping to get one pre moulded without having to cut it.

Huh? I got the liner and it's customer moulded to fit around the rockford sub. It's has a one inch lip all around.
Ill try and take a pic if you want....


Yes please!

Here's a picture with my camera phone.
Image
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

User avatar
napkins1
Lancer ES/EX
Lancer ES/EX
Posts: 129
Joined: Sun Jan 24, 2010 2:41 pm
Location: Australia

Postby napkins1 » Fri Aug 27, 2010 11:27 am

For what its worth ive got one and they really are a brilliant piece of kit.

Especially if transporting bulky items as it stops them slipping around on the carpet.

User avatar
vi93r
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 346
Joined: Sun Jul 12, 2009 9:14 pm
Location: Newcastle, Australia

Postby vi93r » Fri Aug 27, 2010 12:42 pm

Yes there is a hard plastic mat for sportback aswell. Same deal as sedan can cut it along crease to fit rockford.

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Fri Aug 27, 2010 12:52 pm

Or go to Bunnings and get a rubber-backed carpet square .... cut to fit = custom-made + way cheaper. About $20, I think.
Last edited by WTR on Fri Aug 27, 2010 12:59 pm, edited 1 time in total.

User avatar
milobob
Lancer Legend
Lancer Legend
Posts: 1130
Joined: Mon Aug 31, 2009 6:16 pm
Location: Melbourne

Postby milobob » Fri Aug 27, 2010 12:57 pm

That's what I use.. find it stops stuff from swiming around better than the hard plastic.

Though in our outlander we use both. The hard plastic to protect the carpets as we sometimes transport dirty stuff and the rubber to stop slipping.
2010 RenaultSport Megane RS250 Cup Trophee (Xenons+Leather+Front Parkers)


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 16 guests