***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

WTB-evo x manifold

Post Things You Are Wanting To Buy Or Trade.

Moderators: Moderators, Senior Moderators

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Thu Feb 27, 2014 7:52 am

Finding 2nd hand ones is very difficult. I get asked at least once a week as I am frequently involbed when Evo guys upgrade and I sell off the leftover for them....
The going rate is around 250-300 but sometimes they go for more as demand is so high

as an alternative, we are looking at potentially getting NEW oem manifolds. that may end up being in the 700-800 range. maybe a little more, maybe a little less.

It's a lot, yes.
but consider this :
for stock turbo and smaller upgrade turbos, i'm yet to find anything that is "better" in terms of power Vs spool.
The aftermarket options (MAP, FullRace etc) may gain a little midrange and top end, but add 300rpm or so to spool. they are great for larger turbos but for an X swap I honestly don't think they are the way to go.


Just throwing it out there as an option :)
****************************
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Thu Feb 27, 2014 8:58 am

I contacted a Mitsubishi place in NZ as they usually get parts way cheaper than us. New manifold was NZ$600 :shock:

Keep your eye on the US Evo forums and Ebay over there.

Hot tip - i got mine of ebay in the US by searching for 'Evolution' rather than 'EVO' - i think because it wasn't tagged as EVO like everything else it was overlooked.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Thu Feb 27, 2014 8:59 am

BTW- I think I paid about AUS$300 for mine landed
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Thu Feb 27, 2014 9:55 am

NZ option sounds tempting also. Can you PM me the place please?
I get most of my Ralliart stuff from NZ also, might be the same place.

I have looked in to new manifolds ex japan and ex USA as well as locally. Honestly didn't consider NZ :)
****************************

Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!

http://BeebleTune.com

User avatar
jefftsai
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Sat Nov 30, 2013 12:16 pm
Location: brisbane, Austrlia

Postby jefftsai » Thu Feb 27, 2014 1:34 pm

thx, just wonder that will Mitsubishi sale me the new one?
where can i find from NZ?

so confuse, don't know which should i get, oem or aftermarket one. im going to put the MHI turbo from fp into my car.

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Thu Feb 27, 2014 2:10 pm

jefftsai wrote:thx, just wonder that will Mitsubishi sale me the new one? where can i find from NZ? so confuse, dont know which should i get, oem or aftermarket one. im going to put the MHI turbo from fp into my car.


I'd put the OEM on.. MHI was build for it... just keep eye out for it. You will find one eventually cheap. :)

And are you the one that bought the MHI from AK Racing??
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image

User avatar
jefftsai
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Sat Nov 30, 2013 12:16 pm
Location: brisbane, Austrlia

Postby jefftsai » Thu Feb 27, 2014 2:12 pm

Yes~ I bought from them! First time deal with them .

User avatar
jefftsai
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Sat Nov 30, 2013 12:16 pm
Location: brisbane, Austrlia

Postby jefftsai » Thu Feb 27, 2014 2:14 pm

Any comment on them?

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Thu Feb 27, 2014 2:16 pm

jefftsai wrote:Any comment on them?


Any comment? You mean you want my opinion on them?

Well, Alan, who you most likely dealt with, I've known him for around 11 years now. He is a really good guy and very trust worthy. So you are in good hands :)
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Thu Feb 27, 2014 2:28 pm

Price from NZ very reasonable. I'm thinking you might do well to contact Alan again about a manifold :)
We may well be doing a bit of a bulk buy since there is demand for them. and at these sorts of prices I'd probably go a new one over a 2nd hand unit.
****************************

Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!

http://BeebleTune.com

User avatar
SEB15
Lancer Evolution
Lancer Evolution
Posts: 931
Joined: Fri Aug 19, 2011 7:31 am
Location: Ipswich, QLD Australia

Postby SEB15 » Fri Feb 28, 2014 11:36 pm

jefftsai wrote:thx, just wonder that will Mitsubishi sale me the new one? where can i find from NZ? so confuse, dont know which should i get, oem or aftermarket one. im going to put the MHI turbo from fp into my car.


Thanks for keeping me "updated".... *tsk*

User avatar
jefftsai
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Sat Nov 30, 2013 12:16 pm
Location: brisbane, Austrlia

Postby jefftsai » Fri Feb 28, 2014 11:44 pm

SEB15 wrote:[quote:7e6d9bc48a=jefftsai]thx, just wonder that will Mitsubishi sale me the new one? where can i find from NZ? so confuse, dont know which should i get, oem or aftermarket one. im going to put the MHI turbo from fp into my car.[/quote:7e6d9bc48a] Thanks for keeping me updated.... *tsk*


sorry man


Return to “Buying & Trading”

Who is online

Users browsing this forum: No registered users and 11 guests