***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
WTB - Ralliart Snorkel
Moderators: Moderators, Senior Moderators
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Here is a used one on eBay but in the US and with the current exchange rate and shipping will cost about $150 AU, so almost the same as the $170 I was quoted at a Mitsu dealer for a brand new one.
http://www.ebay.com.au/itm/08-OEM-Mitsu ... 1c58456694
http://www.ebay.com.au/itm/08-OEM-Mitsu ... 1c58456694
- Shaun Patterson
- Lancer VRX/GTS
- Posts: 381
- Joined: Fri Sep 05, 2014 9:59 pm
- Location: Rockhampton Australia
http://www.mitsubishipartswarehouse.com ... am=6292560
worked out 75 shipping pretty cheap for brand new
worked out 75 shipping pretty cheap for brand new
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Lancer1993 wrote:I found one on eBay, jumped on it right away. Just one issue, it doesnt line up 100%. Image below shows where its hitting the other plastic, also cant get the 2nd screw lock in place. [img:6bf6821e5b]http://www.clubcj.net/cached_images/1447668952_11_PB_8162_0.jpg[/img:6bf6821e5b]
Notice you haven't opened up grill in front of snorkel.
As this is a pretty well sealed off area its possible your new snorkel is more
restrictive than the original because the original had an extra 25 extra holes clear of this area to help.
Noticed elseware you mentioned hole attaching front of snorkel didn't
line up. I think you will find the problem is it just needs a longer attacher.
Who is online
Users browsing this forum: No registered users and 3 guests