***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

WTB : Evo X intercooler with piping

Post Things You Are Wanting To Buy Or Trade.

Moderators: Moderators, Senior Moderators

User avatar
Eazay
Lancer Learner
Lancer Learner
Posts: 7
Joined: Mon Jan 19, 2015 3:47 am
Location: Sydney, Australia

WTB : Evo X intercooler with piping

Postby Eazay » Mon Mar 23, 2015 2:11 pm

Hi guys, thinking of upgrading to the evo intercooler set up. Can't seem to find any currently for sale. Would prefer NSW

Only thing i've found are aftermarket units -

http://www.gumtree.com.au/s-ad/coopers- ... 1073300263


is this a viable option if all else fails ?

User avatar
rustybucket
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Wed Nov 20, 2013 10:43 am
Location: Melbourne

Postby rustybucket » Tue Mar 24, 2015 2:15 pm

I have been wondering about that exact set.
Anyone with any experience with these?
Also available on ebay

http://www.ebay.com.au/itm/KLS-turbo-In ... 541c26f0a6

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Tue Mar 24, 2015 5:13 pm

I bet made in china crap??
But good luck anyway. I wouldn't touch it
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image

User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Wed Mar 25, 2015 6:28 am

Check with Alan from AK Racing, he had a few a couple of months ago and might still have some.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h

User avatar
Eazay
Lancer Learner
Lancer Learner
Posts: 7
Joined: Mon Jan 19, 2015 3:47 am
Location: Sydney, Australia

Postby Eazay » Wed Mar 25, 2015 7:33 am

Cheers guys, how did you find the fmic install? did you keep the stock lower pipe?

User avatar
r00tc4u53
Lancer ES/EX
Lancer ES/EX
Posts: 148
Joined: Tue May 20, 2014 5:46 pm
Location: Sunshine Coast

Postby r00tc4u53 » Wed Mar 25, 2015 2:41 pm

PM sent in regards to available cooler due to aborted RA mods

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Thu Mar 26, 2015 10:12 am

i have 1 stock Evo X cooler left with stock pipes.

as for china IC, NOT saying the above is the case. but we did alot of testing on a few and found they performed less that stock evo X once heat soaked. where as high end coolers like ultimate racing, plazaman, ETS, AMS etc work better. in both temps and pressure drop.

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Thu Mar 26, 2015 10:12 am

most things are cheaper for a reason

User avatar
the sam
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Wed Dec 18, 2013 7:35 pm
Location: Sydney, Australia

Postby the sam » Thu Mar 26, 2015 8:10 pm

I've had great results from the cheaper Chinese (KLS) coolers for anything under about 250 kw. Above about 27-28psi yes they do tend to perform worse than the more expensive brands. But for a street car with, say 220wkw, they perform flawlessly with minimal heat soak. If you are tracking hard, I would lean towards something like a Plazmaman cooler, but if you are not beating on it hard it will make a minimal difference.
230kw/430nm @ 24psi on E85
12.191 @ 108.81mph - Fastest stock turbo ralliart in Australia
www.facebook.com/BoostinJuiceTuningSydney
www.clubcj.net/viewtopic.php?p=369141#369141


Return to “Buying & Trading”

Who is online

Users browsing this forum: No registered users and 38 guests