Hi Team,
need a double din for my awesome $200 chinese dvd player.
if any1 has one with a reasonable fit please me know
victoria prefered.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
WTB: Double Din Facia
Moderators: Moderators, Senior Moderators
WTB: Double Din Facia
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster)
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Love that one of the pics used is of a HU with a tape deck... was the CJ ever offered with a tape deck?
Also for a different look I'd consider getting some vinyl paint or there is a method now that can make them look like carbon fiber, depending on the look you're going for. It's called hydro dipping, ask around at paint shops it's a cool way to customize small body parts like that.
Also for a different look I'd consider getting some vinyl paint or there is a method now that can make them look like carbon fiber, depending on the look you're going for. It's called hydro dipping, ask around at paint shops it's a cool way to customize small body parts like that.
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
http://www.ebay.com.au/itm/CAR-RADIO-ST ... 4d155d8138
This is who I brought mine off. Had for 4 years - does exactly what it should and looks fine. Not quite a 100% fit but, as stated above, hardly noticable
This is who I brought mine off. Had for 4 years - does exactly what it should and looks fine. Not quite a 100% fit but, as stated above, hardly noticable
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
I bought this just the other day:
http://www.ebay.com.au/itm/261193181272
I havent fitted it yet, but the finish seems ok, no scratches etc. Looks good so far, but I'll see when its fitted. It also turned up the next day after ordering
http://www.ebay.com.au/itm/261193181272
I havent fitted it yet, but the finish seems ok, no scratches etc. Looks good so far, but I'll see when its fitted. It also turned up the next day after ordering
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Lancer1993 wrote:Ill look, just wondering how much space is behind the strip that runs the width of the dash with the hazard switch in it. I have a dash cam and GPS power Id like to hide.
Just run the lead across the header rail of the hoodlining, down the A pillar trim, under the rubber door seal, under the carpet on passenger side and up under\behind dash and what not, video of it on youtube dashcam owners australia channel, takes about 30mins.
Who is online
Users browsing this forum: No registered users and 43 guests