Hey everyone,
I'm hoping someone here has a spare front grille they are willing to sell.
Story below of how i came about in need of a grille:
my wife and i do alot of country driving and yesterday we hit a pigeon. My wife was driving as I was taking a nap in the back so i didn't happen to see the incident and didn't think much of it when she told me as alot of the time these incidents are unavoidable.
When we pulled up for a driver change i checked out the damage, it broke half of the top piece of the grille but no signs of a bird so i just kept driving.
After 4 more hours of driving we finally turned up home and was discussing the damage with my neighbour when after about 5 mins of talking we heard something flapping around in the bumper!!! I thought you beauty it's still alive!
I removed the right fog light mesh and sure enough a pigeon was sitting nice and cosy in there, it even had plenty of room and didn't look too distressed. I will upload some photos soon!
After i took him/her out it unfortunately was bleeding from the mouth and died by this morning. For a while i was hoping it would pull through OK.
Anyways, Mitsu has quoted me just over $200 for a new grille which is pretty steep! I'm hoping someone here can help me out?
Thanks
Sam M
Mobile: 0427 246 716 or email sam.mule@gmail.com
Oh and i'm in Perth in case people have to factor postage into the cost.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
WTB: Front grille (top piece)
Moderators: Moderators, Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I can tell you that via our sponsors, I can buy the grill for:
7450A095 Grille Radiator
RRP= A$187+
CCJ=A$155
Postage would probably be A$15 to WA?
7450A095 Grille Radiator
RRP= A$187+
CCJ=A$155
Postage would probably be A$15 to WA?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
maybe try the wreckers? I've got a spare grille I got off another member, but the badge was ripped off. It will be available for you to simply pay postage if you want it, I just have the grille surround on while I paint my grille surround.
Or, the other option is that you can have the grille surround, buy some mesh from the auto store and have a custom grille of your own. I'd do that and give you the full grille, but I like my badge :p
Or, the other option is that you can have the grille surround, buy some mesh from the auto store and have a custom grille of your own. I'd do that and give you the full grille, but I like my badge :p
Blitz Air Filter | RPW Stage 1 ECU Flash Tune | UR Front Tower Strut Bar | UR Rear Lower Bar
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
For the Aspire Top Grill, they're
7450A462 GRILLE-RADIATOR (MAIN GRILLE)
RRP = A$253+
CCJ Price = A$246
Sorry I don't have good news. It's still about A$90 dearer?
I think Peter's idea of the wrecker is great but most cars which get wrecked are head ons. So quite difficult still to find grilles.
7450A462 GRILLE-RADIATOR (MAIN GRILLE)
RRP = A$253+
CCJ Price = A$246
Sorry I don't have good news. It's still about A$90 dearer?
I think Peter's idea of the wrecker is great but most cars which get wrecked are head ons. So quite difficult still to find grilles.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
kinesis wrote:maybe try the wreckers? I've got a spare grille I got off another member, but the badge was ripped off. It will be available for you to simply pay postage if you want it, I just have the grille surround on while I paint my grille surround.
Or, the other option is that you can have the grille surround, buy some mesh from the auto store and have a custom grille of your own. I'd do that and give you the full grille, but I like my badge :p
Mate this might be perfect for me, i still have my badge, i need the bits attached to it. My only question is what model exactly is your car because the piece i'm after is actually attached to the plastic on which the badge sits.
After i pulled mine apart i realised it's a 2 piece setup. You have the surround (the part which looks like you've painted white) and that is fine on my car, the inner piece is what i need (the plastic criss cross mesh) which is attached to the badge.
For all the other guys, i have tried almost every wrecker in Perth and not 1 has a new shape lancer. They kept telling me i was basically dreaming, i thought a lancer wouldn't be too hard to find but i guess i'm wrong.
Who is online
Users browsing this forum: No registered users and 16 guests