***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Trade: Neffy Carbon Interior Trim for your stock - Brisbane

Post Things You Are Wanting To Buy Or Trade.

Moderators: Moderators, Senior Moderators

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Trade: Neffy Carbon Interior Trim for your stock - Brisbane

Postby draevon » Mon Mar 29, 2010 1:45 pm

Hi All,

Here's the deal. I currently have my trim done in Neffy wrab carbon fabric. More than happy with it, however I have 8 feet of 3M Di-Noc carbon vinyl coming in the mail. I'm going to be doing my roof, but also want to do a few extra bits in the interior like the armrest arounf the window switches. I don't want to have two different carbon products side by side, so I'm planning to retrim my interior. I could take of the fabric and strip the adhesive off, but I thought this might be easier.

So ... looking for a someone who owns a manual CJ in Brisbane who'd like some Carbon trimmed interior pieces. There's the three long silver bits (dash and both doors) and the gear selector surround. There's nothing wrong with it, both Adrian and Tryg have seen it and commented on the quality job. I'll get together with the person I choose, pull out their trim and replace it with the carbon trim and be on my way. I'll do all the work ... you just have to sit around for about 40 minutes while I make the swap - ideally at my place in Greenslopes. I don't mind what condition your trim is in (scratches etc), so long as all the clips are intact. You also get my left over neffywrap if I can find it :)

So post here or shoot me a PM if you're interested. Priority goes to anyone who has helped me out from the forum ... after that I'll just choose someone who lives nearby. My carbon is in the mail, so I'll do the swap either this weekend or the one after. I'll work out details once I pick the person.

Note: This isn't a competition or anything - I reserve the right to choose whoever I want for this.[i]

Image

Image
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Mon Mar 29, 2010 1:59 pm

both of the 2 look quite identicle, very small differances. it will be pratically un noticable unless you stare at it, why dont you wait till your di-Noc arrives and see what you think of the differances before, you have to take everything off and redo it again. i have seen the 2 together before, they are quite similar but its your decision.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Mon Mar 29, 2010 2:08 pm

Yeah I'm a bit of a perfectionist. Even if they did look the same, it'd still bug my that they were different products. Go figure.
.

Image

GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon Mar 29, 2010 4:02 pm

Just spoke To Kym she is kern if it is a straight swap. She will get in touch when she gets home :)

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Mon Mar 29, 2010 4:31 pm

now if you do it with Di-Noc you might be able to get it into the 12V power output area.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
mr_evo
Alumni
Alumni
Posts: 761
Joined: Sun Mar 21, 2010 12:39 pm
Location: Gold Coast
Contact:

Postby mr_evo » Mon Mar 29, 2010 5:16 pm

I'll do it if Shane wont :)
:D I'm back baby! :D
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks

User avatar
86MIM
Lancer Evolution
Lancer Evolution
Posts: 933
Joined: Mon Nov 23, 2009 3:28 pm
Location: Brisbane, Australia

Postby 86MIM » Mon Mar 29, 2010 5:16 pm

You've got PM Tim =D
kii

tykkään kiiltävä, nopeasti ja se on saanut olla ähkyä.
_________________
ClubCJ Lifetime Member #86

User avatar
kinesis
Project Team Member
Posts: 778
Joined: Thu Nov 26, 2009 7:07 pm
Location: QLD, Australia

Postby kinesis » Mon Mar 29, 2010 5:42 pm

gah! I'm in the wrong state!
Blitz Air Filter | RPW Stage 1 ECU Flash Tune | UR Front Tower Strut Bar | UR Rear Lower Bar
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Mon Mar 29, 2010 8:19 pm

Likely sorted with Kym, using one of Adrians karmic vouchers :)

Thanks all.
.

Image

GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon Mar 29, 2010 8:22 pm

Good day for trading today it seems :D

Thread Closed!!

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Mar 29, 2010 8:43 pm

Gotta love a fast and smooth transaction... and the CCJ Brisbane grapevine ROFL


Return to “Buying & Trading”

Who is online

Users browsing this forum: No registered users and 41 guests