***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

merlin signing-on

Please Introduce Yourself Here.

Moderators: Moderators, Senior Moderators

User avatar
merlin
Alumni
Alumni
Posts: 374
Joined: Wed Feb 09, 2011 3:51 pm
Location: Sydney, Australia

merlin signing-on

Postby merlin » Wed Feb 09, 2011 5:56 pm

Hi guys, merlin here, otherwise call me Dave.
I drive a red Evo9, but a couple of your members, Irving and Sam, have got me involved with the ECU tuning.

I have in fact driven a 4B11 Lancer, hired one last October to drive from Cairns to Cardwell and thereabouts on a fishing trip. Loved the car, was quite impressed with it as stock and wondered then if it would prove to be tuneable - happily the answer is yes.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Feb 09, 2011 6:06 pm

Welcome Dave. Thanks for coming on board... . I'm sure you'll contribute greatly to the ECU tuning discussions here... .

Very friendly and appreciative lot here. Don't let anyone else tell you otherwise... . Also a couple who hang around to suck whatever information lies about...so be wary about dispensing golden nuggets.
Last edited by ofey on Wed Feb 09, 2011 6:23 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Wed Feb 09, 2011 6:22 pm

Hi Merlin/Dave, welcome to the club.

Sam told me about you and I am looking forward to getting some help from you for tuning our ECU's.

I wish I could plug my brain in to yours and download what you know about tuning cars.

If that was possible I am sure I would not have enough memory space in my head to store all the info.

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Wed Feb 09, 2011 6:32 pm

Hi Dave.

I welcome you also and express the same sentiments as Ofey and perhaps the wishes of Troy.

As I have indicated via our email and phone conversations,

Your Knowledge and Willingness to Assist the membership on ClubCJ will be a most Valuable and Truly Welcomed and Long Sought Addition toward the Performance Base within.

A True Pleasure and Welcome, Merlin.

Sam.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Wed Feb 09, 2011 6:39 pm

Hi Merlin/Dave - Welcome to ClubCJ
SAM has told me a lot about you and it certainly sounds like you know your ECU's,it will be a pleasure learning from someone with your experience.
I look forward to meeting you and seeing what you can do with a 4B12 M/T ECU,I think there is heaps of potential in the tune of these engines and their electronic brains.
All the best
Regards Chris. :mrgreen:
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Feb 09, 2011 6:58 pm

For the rest of this membership base who doesn't know whom Merlin is (besides being King Arthur's Wizard :lol: ), we are in the presence of greatness.

Taking a post out of the rcolt forums:

daedalusjc wrote:for anyone whos been watching new members you would have realised that an absolute and utter legend in the openecu sector has graced us with his presence. expect some awesome opensource shiznit soon.


Merlin is among 5-7 people (along with Tephra, Golden, Gunzo, mrfred, SiC and acamus) recognised the world over as leaders in ECU tuning/hacking for the Mitsubishi Evos and the author of the unbelievably well written:

Merlins Ralliart & Evolution-X Tuning Guide

These are the real people behind the FREE ECU tuning knowledge available all over the internet.

(And pretty much how I learned how to produce the definition files which I now make freely available to all members.)

What started free should always remain free. I am now working on a couple of USDM, EDM and SADM files for NA Cars (Turbos already done by Tephra and Golden) which I will also be releasing for free in the coming weeks (more about this later).

Long live OpenSource... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
bobcrusader
Lancer VR/GT
Lancer VR/GT
Posts: 273
Joined: Thu Nov 19, 2009 10:16 pm
Location: Melbourne, Australia

Postby bobcrusader » Wed Feb 09, 2011 10:19 pm

Welcome Merlin - I loved the tuning guide and wanted to say thanks. I'm impressed that so much tuning knowledge comes out of Australia - we must all think stock cars go too slow!
- 2009 Lancer Ralliart
- Boostpill + Tune
- Upgraded intercooler + pipes
- Turbo XS Catback
- Drift BoV
- Blitz Air Filter

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Wed Feb 09, 2011 11:02 pm

thank you so much for the tuning guide , its really impressive what you've done here
Lancer Evolution 10MR

User avatar
scraverX
Lancer MASTER
Lancer MASTER
Posts: 1590
Joined: Fri Oct 30, 2009 8:12 am
Location: Canberra, Australia
Contact:

Postby scraverX » Wed Feb 09, 2011 11:57 pm

Indeed, welcome. *bows*
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Thu Feb 10, 2011 7:17 am

Yes welcome Merlin it is great to have someone with such knowledge of ECU's in the club (particularly at the time where I am starting to performance mod my car :P). If there is anything you need at all let us know although I have a feeling Ofey and Sam are going to have pretty much everything covered.

Regards Nathan.

User avatar
merlin
Alumni
Alumni
Posts: 374
Joined: Wed Feb 09, 2011 3:51 pm
Location: Sydney, Australia

Postby merlin » Thu Feb 10, 2011 9:27 am

Thanks guys for the warm welcom.

Now that I have had chance to dig into the ROMs a bit, I got to thinking that the EvoX/Ralliart tuning guide could be re-written to target the NA Lancer. It will still be a lot of work though.

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Sun Feb 20, 2011 10:25 pm

Welcome master magician! :P
I've heards lots of good kudos from SAM-24A and Ofey.
Thanks for all the technical input and efforts you have provided Irving.

I'm sure the club will thank you many times over, now and in the future. :)
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
Exoneration
INACTIVE Member Account
Posts: 46
Joined: Mon Feb 14, 2011 9:44 pm
Location: Morphett Vale

Postby Exoneration » Mon Feb 21, 2011 7:23 am

Welcome Merlin / Dave, good to have you here mate!

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Mon Feb 21, 2011 8:35 am

welcome again Dave.
i`m sure u will live up to your username :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image


Return to “NEW MEMBERS”

Who is online

Users browsing this forum: No registered users and 42 guests