Page 1 of 1
Updating internal lights with LEDs
Posted: Mon Oct 15, 2012 7:21 pm
by somers181
Hi, has anyone looked at upgrading internal lights with LEDs??
If so does anyone know how to remove the plastic lens to replace the globes as they tilt to turn on it doesnt look like there is any easy way to lever them out without cracking???
Any assistance would be appreciated....
Posted: Mon Oct 15, 2012 8:47 pm
by belle_tb_ES
Which internal lights? The one in the middle? (I was trying to do that tonight. I think you need a small screwdriver) sorry, not sure about tilting ones
Posted: Mon Oct 15, 2012 8:47 pm
by belle_tb_ES
Which internal lights? The one in the middle? (I was trying to do that tonight. I think you need a small screwdriver to wedge the plastic cover off) sorry, not sure about tilting ones
Posted: Mon Oct 15, 2012 9:14 pm
by Syke
the centre interior light requires 2 small screwdrivers on either side. Should just pop right off.
If you are talking about the LED interiors lights being sold on ebay i wouldnt recommend them. I bought a Red one and it does not light up the inside at all. Pretty much makes the interior light useless, not sure if the other colours are this bad.
Posted: Mon Oct 15, 2012 9:20 pm
by Mitch
I have the white from ebay just need to be wary of which sellers you use
Posted: Mon Oct 15, 2012 9:27 pm
by whitenight
Posted: Mon Oct 15, 2012 11:06 pm
by Tac89
If you look in the owners manual it tells you how to remove the covers. I just replaced mine, I bought a set from amazon.
Posted: Tue Oct 16, 2012 6:47 pm
by somers181
Thanks for the info guys, I replaced both interior lights with blue LEDs from Ebay and they look pretty good in the day light and bloody fantastic at night........