***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

i Have a Turboed VRX and need some questions answered :D

Please Introduce Yourself Here.

Moderators: Moderators, Senior Moderators

shaunyork26
Lancer Learner
Lancer Learner
Posts: 2
Joined: Tue Nov 24, 2015 4:02 pm
Location: casino, australia

i Have a Turboed VRX and need some questions answered :D

Postby shaunyork26 » Tue Nov 24, 2015 4:12 pm

Real first name: shaun
Location:casino, nsw
Model: 13my vrx
Colour:white
General interests:CARS haha
Current mods: well, where do i begin, curently running a evo x turbo setup on 8 pound making 160atw kw at 558nm of torque. lots more haha
Planned mods: boost tee and too run a 10psi
How you found out about ClubCJ: aus cj

shaunyork26
Lancer Learner
Lancer Learner
Posts: 2
Joined: Tue Nov 24, 2015 4:02 pm
Location: casino, australia

Postby shaunyork26 » Tue Nov 24, 2015 4:16 pm

Need to ruffly know what sort of figures the rods can hold.

User avatar
merlin
Alumni
Alumni
Posts: 374
Joined: Wed Feb 09, 2011 3:51 pm
Location: Sydney, Australia

Postby merlin » Tue Nov 24, 2015 5:11 pm

The 4B11 engine seems to be good for 14psi on the stock EvoX wastegate.

Dont know about the 4B12.

What ROM are you running?

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Nov 24, 2015 5:58 pm

Sounds interesting, how is the FWD handle with that much power, any torque steer or other issues with not having AWD?
Image
My rides CJ VRX - CC coupe

User avatar
D
Lancer Evolution
Lancer Evolution
Posts: 989
Joined: Sat Sep 07, 2013 3:01 pm
Location: SA, Australia

Postby D » Tue Nov 24, 2015 7:43 pm

(WTTC)
My EVO (X MR) progress: http://clubcj.net/viewtopic.php?p=328713#328713
4 cylinders, 3 diamonds, 2 litre, 1 turbo, 0 reasons to buy anything else
Image
ROTM WINNER SEPT 2014

User avatar
LiX
Lancer ES/EX
Lancer ES/EX
Posts: 126
Joined: Mon Nov 09, 2009 7:38 am
Location: Sofia, Bulgaria

Postby LiX » Wed Nov 25, 2015 5:28 am

Hmmm 558 Nm seems veeery high for your application at that boost level.
Just for reference my turboed 4B10 at 11 psi makes around 300 Nm.

Rods are good for 14 psi of boost, however you will have to reduce the static CR by using a ticker head gasket. Evo X cams are also recommended.
Image

User avatar
merlin
Alumni
Alumni
Posts: 374
Joined: Wed Feb 09, 2011 3:51 pm
Location: Sydney, Australia

Postby merlin » Wed Nov 25, 2015 2:52 pm

Just use an Evo head gasket.

User avatar
LiX
Lancer ES/EX
Lancer ES/EX
Posts: 126
Joined: Mon Nov 09, 2009 7:38 am
Location: Sofia, Bulgaria

Postby LiX » Thu Nov 26, 2015 2:59 am

merlin wrote:Just use an Evo head gasket.

There are better aftermarket alternatives than OEM X head gasket.
Lancer head gasket is 2 layer 0.4 mm, OEM X gasket is 1.0 mm.
Good alternative is the Cosworth 5 layer 1.3 mm head gasket.
Image


Return to “NEW MEMBERS”

Who is online

Users browsing this forum: No registered users and 113 guests