tryg wrote:Exomondo, have you thought about making all your mesh the same?

yeah im still on the hunt for some matching mesh, then ill figure out a way to secure it on there, should be easy with plastic mesh.

Yes it's filthy because I was belting down the freeway towards the beach in the evening so I copped the guts of just about every bug on eastlink on my front bar. This is hard up against the bar sitting flush.

You can see in this picture the raised bit(s), if you smoothed them flat then you would not need to cut holes in your front bar and it would sit flush. http://img8.imageshack.us/img8/5714/img00119200912281458.jpg A quick update though, the ends came away a bit so I grabbed some araldyte from the loc...

Looks good in the pictures. Is there any chance you can take more photos from the side/ close up? Yeah I'm away for a couple days but I'll put some up when i get back. Does this just stick over the centre of your bar, or do you have to cut the centre of your bar and fit this in? Sorry but I can not...

Ok so here are the final pics. The top left edge came away a little during the drying/curing so I squirted a bit of epoxy in there with a syringe and left it to set, now it's all contacting perfectly. http://img192.imageshack.us/img192/3351/img00125200912291512.jpg And with the license plate zip-tie...

Ill pull off those stools in the morning once it's all cured properly and get some shots up

Ok so at the moment things are drying and curing so I thought I'd drop a few photos and an update. I picked up some grill mesh from Autobarn and decided I'd go about this by crafting some mesh covers for the holes and glue them to the cover before I fitted it to the car. This way I could get the mes...

thanks for all your help and advice guys. I'll take some snaps as I go along and post them up when I'm done. I'll likely do this between Christmas and NYE since I've got plenty of time off work

Thanks again, keep you posted

Hey guys, I got the standard cut-your-front-bar evo x style cover. It's going on a white VRX and I'm putting black mesh behind the cut-outs, but I was just wondering if there are any nasty surprises I should try to avoid when slicing the front bar? How has the experience been for anyone who's fitted...