Testing

This is a test

Definitely intercooler, bigger injectors and evo turbo. A better dump pipe and exhaust. An Evo X blow off valve to is more reliable.
After all your mods then get it tuned.

You can pull the vent out without pulling all the dash out. I did mine several years ago but can't remember how. Mitsubishi replaced my vent under warranty but it didn't change. It's a design fault. The only way I suggest you will fix it is pull it apart and some how get more friction between the pi...

biotin wrote:Hello, can mmcs a04 stream music from mobile phone via bluetooth? Thanks

No

They are the same size as standard so of course they will fit your rims. The only time you need to worry about it is when you change to a completely different brake set-up like brembo.

I would imagine it would be possible for those with a smart key as they already have the button on the boot.
Otherwise you could fit an actuator like central locking use.

Hi Lisa welcome to the club. You are definitely better off with the cvt auto as you should get about another 50 kilometres per tank as it's better geared for the highway and less revs for your engine. What model are you planning to get? I would add a few extras to a lancer in your position like thic...

The towbar just unbols from the subframe. Not sure about the harness.

Option 2 won't turn off because the power for the interior lights is on all the time. The interior lights are controlled on and off through the earth. Option 2 will work if you earth through a switch so you can turn them on and off.

Did you try using the search at the top right of the home page? I'm sure you will find what you are looking for with a bit reading

Do you have tinted windows?

Your dealer is wrong. All glass in Lancers have uv protection, so you don't need to tint the rear privacy glass. 20% on the front matches but is illegal and you will need to open front windows to reverse at night especially in difficult locations. Worth it in my opinion as it looks terrible if it do...

Sounds like you blew the fuse when you put it back in.
Take it out and replace it as sometimes they look okay but aren't.

also i was told by a mechanic that its best to remove the positive terminal first, i always thought it was the other way around No that's wrong. You take off the negative first and put on the positive first. You do this so if the spanner touches the body with the positive it does not earth and spar...